Working Principle and Characteristic of RF Dryer






Working principle
In the high-frequency electric field, the dielectric water in the wet leather will be affected by the electric field, causing molecular disturbance and friction and heat between molecules, so that the moisture in the leather will get enough heat and vaporize, and then the steam will be taken away by the air to achieve the purpose of leather drying.

Characteristics of rf dryer

(1) The drying speed is fast because the electrical energy into heat, high frequency electric field and leather do not need any intermediary, so in the moment that leather is electrified, heat will produce, to achieve the purpose of rapid drying.

(2) Uniform drying, good leather quality if the leather dry to the specific moisture content, will encounter a lot of problems, one of them is the moisture uniformity problem. In the past, most tanneries have dried the leather to a leathery state and then rewetted it. It is said that only in this way can the leather have a uniform moisture content so that it can be tendered. The high frequency heating drying method is very different, the leather part of the absorption of heat is proportional to the moisture content of the part. As a result, the wet parts absorbed more heat energy, so that the moisture content of the whole skin became uniform. The traditional drying method can only carry out conventional drying, the wet parts retain more water, unless it is always drying, until all the water evaporation, so it is very easy to cause excessive drying and loss of area.

(3) Easy to operate, easy to control temperature, easy to achieve automation.

(4) High power consumption, gasification of 1kg of water about 8kW·h power.
High frequency welding equipment for sun visors of cars introduce advanced technology and major components, This car visor high-frequency heat sealing machine has strong output and can shorten the high-frequency time. It can weld the products in the most rapid time and greatly increase the production capacity of automobile visor heat sealing machine. It is equipped with a stepless heating temperature control system device according to different products. Production and processing needs can be adjusted to a suitable temperature, improve work efficiency, and make finished products more perfect. It also has an automatic over-current protection system to provide protection for vacuum tubes and protect the sun visors of high-frequency heat sealing machines.

评论

发表评论

此博客中的热门博文

Application of solid-state high frequency equipment in high frequency welded pipe production

图片
  The solid state hf welder  is different from the electron-tube high-frequency welding machine. The electron-tube radio frequency welding equipment has output welding transformer. The induction coil is installed on the secondary side of the welding transformer, which is easy to match. Solid state high frequency welding machine in addition to the low working voltage, at the same time slot way capacitance and induction coil, wear on the welding steel pipe resonant directly, because there was no welding, less level of coupling, significantly higher efficiency, and then the production of induction coil, strict and standard, make it match, due to the voltage at the same time, the low induction coil diameter and welding steel pipe diameter (the clearance of v-shaped opening) can be reduced, and it is one of the factors of improving the efficiency of welding. One thing is certain, the induction coil strict and the standard manufacture produces the benefit is far higher than the induction coi
阅读全文

HF Welders

图片
  The theory of high frequency welding equipment : Under the effect of the high frequency electric field, the positive and negative charges of the substance to be heated displace to form electric pole polarons. The polarons polarize repeatedly to cause the molecules to produce the intense friction to give heat out. The electric field energy absorbed by the substance changes into heat energy to realize the purpose of heating.   Machine classification of RF  welder for sale The high frequency welding machine(HF machine) can be divided as follows according to the industry: HF plastic welding machine, RF heat sealing equipment, medical bag making machine and car interior heat sealing welding equipment, inflatable thermal welding equipment, radio frequency plastic welding machine, membrane structure canvas welding equipment, belt welding machine like industrial belt skirt side baffles welding machine, non-woven heat sealing welding equipment, packaging blister heat sealing equipment, flexib
阅读全文

How To Deal With The Faults Of Hf Welding Pvc?

If the time of hf welding pvc is too long, there are often some faults. After the failure occurs, users must find and deal with it in the first time and solve it in time. For different faults, the solutions are different. The following solutions are listed here for everyone: If the welding effect is not ideal or it cannot be welded or the workpiece is damaged when it is in the process of hf welding pvc , we can not think that it is the problem of equipment. It could be other problems. For example: equipment setting error, blown fuse and so on may happen. Common failure analysis and solutions: 1. If there are bubbles in the process of hf welding pvc with workpieces, it is not directly related to the equipment usually. (1) situation of loose connection it is possible that the flow meter of the gas regulator has been damaged or blocked with sundries. (2) there may be sundries on the surface of the workpiece. 2. it is not directly related to the equipment if the
阅读全文