Main Characteristics Of Inflatable Welding Machine

 Features of inflatable welding machine:

1. The operation of inflatable welding machine

Inflatable welding machine has two push dials, two work bits. The operator only needs to put the products in it, push the push plate to trigger the micro switch, and the molds go down automatically, heat up, and go up. The whole process is simple and safe with high frequency. Staff can use the machine without special training.

 

2. Adjustment of output force of inflatable welding machine

It adopts special low loss coaxial oscillator, which can adjust the output force at any time due to the size of the mold and the thickness of the glue. When you operate the inflatable welding machine, it will not cause interference with telecommunication with it. The adjustment of output can also be combined with the time system to maximize output. The heat sealing machine can weld the product in the shortest time and increase the production.

 

3. Protection device of inflatable welding machine

A: current limiting protection: when the output force regulation is too large, it will cut off the output of high cycle so as to protect the electronic tube in the machine from damage due to excessive current.

 

B: Spark protection of inflatable welding machine: in the process of work, if the jump fire phenomenon appears in molds, the protector will cut off the output, and the molds will automatically rise to leave the product, so that the mold will not be damaged by the jump fire.

 

C: Compact processing: in the process of work, the high-cycle output can be stopped at any time and the mold can be returned to the original position.

 

4. Heat, constant temperature of inflatable welding machine

Inflatable welding machine has high frequency self-heating. The motor also has a 2000W heating element. The thermostat preheats the mold, which reduces the welding time and eliminates flashover.

 

5. Rising distance of inflatable welding machine

Inflatable welding machine is equipped with a 3-position solenoid valve. It can be used in conjunction with the time system, and can adjust the rising distance of the cylinder at will, so as to reduce the time required for cylinder rollout and recovery and improve the production speed.

 

The main features of inflatable welding machine: it adopts PLC programming control, and the operation is simple, the production efficiency is high. It has the features of automatic walking, and precise position. There is no need to move the material and machine. One seam at a time. It has seam neat, no wrinkles, and no knife marks. Welding speed is up to 5-10m per minute.

 

The main application of inflatable welding machine: products are widely used in shoes clothing embossed, inflatable toys, trademarks, bags, shower curtain, carpet, packing bag, hot water bag, car seat cushion, sporting goods, plastic welding machine, stationery, PVC folding box, PVC industrial belt, medical supplies, glasses box, tents, tools, electronics, electrical appliances, blister blister vacuum packing seal, etc.

 

We provide high frequency welding equipment for sale, if you have needs, please contact us.

 


评论

发表评论

此博客中的热门博文

Application of solid-state high frequency equipment in high frequency welded pipe production

图片
  The solid state hf welder  is different from the electron-tube high-frequency welding machine. The electron-tube radio frequency welding equipment has output welding transformer. The induction coil is installed on the secondary side of the welding transformer, which is easy to match. Solid state high frequency welding machine in addition to the low working voltage, at the same time slot way capacitance and induction coil, wear on the welding steel pipe resonant directly, because there was no welding, less level of coupling, significantly higher efficiency, and then the production of induction coil, strict and standard, make it match, due to the voltage at the same time, the low induction coil diameter and welding steel pipe diameter (the clearance of v-shaped opening) can be reduced, and it is one of the factors of improving the efficiency of welding. One thing is certain, the induction coil strict and the standard manufacture produces the benefit is far higher than the induction coi
阅读全文

How To Solve The Welding Problems Of PVC Membrane Welding Machine

图片
  At present, pvc membrane welding machine  has been widely promoted in a number of plastic welding industry. Various welding defects are inevitable in the process of use. In this article, it mainly analyzes how to solve the problems in debugging or welding.   1. Crush and bruise Pressing injury and abrasion are common problems in the process of hf pvc welder . Sometimes it's not so serious, and it just gets white or marks. When you encounter such problems, the first thing to do is to ensure that the location of the tooling is not out of alignment. First let off the air of the cylinder, press down the welding head, and carefully observe whether the welding head position of the scratch is correct. If the welding head is in the correct position, or if the abrasion or compression occurs on the support (or lower cover), then it is necessary to observe whether there is any interference between the tooling and the product. If it is old tooling, it is suggested to clean the tooling with a
阅读全文

HF Blister Packaging Welders

图片
  The HF blister welding machine  is an inexpensive option for creating packages that are durable, transparent, and tamper proof. We make a variety of shapes and can custom design a blister pack that will showcase your product in the best possible manner. Although we strive to provide our customers a very competitive price, we will not sacrifice quality to do so. All products are tested for clarity, wall thickness, and dimensional compliance before leaving our plant.   A clear plastic blister pack can be used in conjunction with a cardboard blister card to keep the product in full view for the customer to examine. The blister packaging is attached to the blister card through a heat-sealing process of high frequency blister sealing machine that allows the product to be displayed in a wide variety of methods. While this heat sealing process can be done with highly automated equipment, the use of blister packs is somewhat limited to light weight items. For heavier contents, a plastic clam
阅读全文